Viewing The Source List Of Formats - Quantum Data 881 User Manual

Viewing the source list of formats

152 Chapter 5 Working with Formats
You can view the list of formats available in the generator using the front panel or the
command line interface. Use the following procedures to view the Source (format) list.
Note: The Source list of formats that appears on the generator's display is determined by
the format path. In addition, the list may be filtered based on the interface selected and the
format catalogs that are enabled. For more information about setting the path, see
the 882's path" on page 17. For more information about format catalogs, see
catalogs" on page 199.
To view the formats in the Source list using the front panel:
Press the Source key. The list of formats appears on the generator's display as shown
below. To see all of the formats, press the + and - keys to scroll through the list.
*DMT0660
DMT0675
DMT0785H
DMT0860
To view the formats in the Source list using the command line interface:
1. Establish a session with the generator using either HyperTerminal over a serial
connection or Telnet over an Ethernet LAN. See
the 882" on page 30 or
2. Set the path to the format folder on the medium you want to view using the following
command:
FMTP /tffs0/Library/Formats // sets format path to flashmen directory
3. List the contents of the format folder by entering the following command:
FMTQ? 1 200
DMT0672
DMT0685
DMT0856
DMT0872
"Establishing a Telnet session with the
// lists the formats from 1 through 200
"Establishing a terminal session with
882" on page 33.
"Setting
"Format