Quantum Data 881 User Manual page 864

PNGU
Class
Description
Command syntax
Example 1
Example 2
Related commands
486 Appendix A Command Reference
Pseudo Noise Generator Use
Signal Analyzer - Pseudo-random noise
Loads the hardware required to generate pseudo-random noise (per the latest
pseudo-random noise signal settings).
PNGU
PNSF 1 //Pseudo-random noise signal format set to CURRENT (internal)
PNST 1 //Pseudo-random noise signal type set to QDI-BCM
PNSA 1 //Pseudo-random noise signal advance set to ACTIVE PIXELS
PNSM 0 //Pseudo-random noise signal mode set to AUTO
PNSP 0 //Pseudo-random noise signal procedure set to CONTINUOUS
PNSG 1 //Pseudo-random noise signal gate set to ON
PNGU //Output Pseudo-random noise using latest parameters
To stop pseudo-random noise output:
PNSG 0 //Pseudo-random noise signal gate set to OFF
PNGU
PNSG