Power Requirements; Power Supply Specifications; Table 2-16 Power Supply Specification - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
Table 2-14 Cable Connection Between the analogue Port and the Single Line Equipment
OPX

5.2
Power
Requirements
Power
Consumption
Input Voltage
(Rated Voltage)
System Hardware Manual
Connected Equipment
Mixing digital and analogue ports through the same 25-pair cable runs is not recommended.
Connected Equipment
Music on Hold and Background Music Sources
External Amplifier
ITL Cabling
IP Video Doorphone

Power Requirements

A dedicated 100VAC/
within seven feet of the chassis is required. A separate dedicated outlet for
each chassis should be installed.
Double Pole/Neutral Fusing
(power supply fuses are located at both the L and N side).
5.2.1

Power Supply Specifications

Table 2-16 Power Supply Specification

110VAC@15A
Controlling/Base
Base Chassis
4 Chassis total
Cable
Twisted Pair
Table 2-15 Cabling Requirements
120VAC/220VAC/230 – 240VAC
110VAC 220VAC
220VAC@15A
Controlling/Base
Chassis
Base Chassis
= 259VA = 262VA
4 Chassis total
= 1036VA = 1048VA
90VAC to 264VAC
(100VAC/120VAC/220VAC/230-240VAC)
Maximum Feet from Connected
Equipment to Telephone
4000m with 26 AWG (Φ0.4mm)
6400m with 24 AWG (Φ0.5mm)
10600m with 22 AWG(Φ0.65mm)
(1500 ohms or less (Including the SLT))
Cable
Hi-Fi Shielded Audio Cable
Hi-Fi Shielded Audio Cable
Cat 5 Straight Data Network
Cable – 328.1 ft (100m)
maximum distance
Maximum 100m (by LAN cable)
50Hz/60Hz circuit located
230-240VAC
230-240VAC@15A
Controlling/Base
Chassis Chassis
Base Chassis
= 276VA
(1.15Ax240V)
4 Chassis total
= 1104VA
Issue 9.0
2 - 19