Configuring The Ip Telephone For The Ten Key Kit; Table 5-11 Keypad Kit Type - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
5 - 50
4.8.4

Configuring the IP Telephone for the Ten Key Kit

1. Press Menu, then 0 (Config) to enter the terminal program
mode.
2. At the Login screen, enter the user name (default = ADMIN)
and password (default = 6633222) and press the OK Softkey.
3. Press 3 for Maintenance Setting.
4. Press 4 for Adjust.
5. Press 2 for Key Kit Type.
6. Press the Up/Down key to select the keypad kit.
Keypad Kit Entry
Kit1
Kit2
Kit3
Kit4
Kit8
Kit9
Kit10
Kit11
Kit12
7. Press 4 for Next.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Table 5-11 Keypad Kit Type

Description
Type A – Japan with cursor key
Type A – US with cursor key
Type B – US with cursor key
–
32 Line Key without cursor key
Type A – Japan without cursor key
Type A – US without cursor key
Type B – US without cursor key
–
UNIVERGE SV8100