Installing The Dcl-60-1 Console - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Keep the following in mind when installing DSS Consoles:

A 60-Button DSS Console requires a separate digital station port

when pairing with a digital multiline terminal. For IP terminals, the

console is connected to the side option slot using a special cable.

Installing the DCL-60-1 CONSOLE

Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 5-79 DCL-60-1 CONSOLE

To prevent possible damage to the

DCL-60-1 CONSOLE or the DTL/ITL

multiline terminal during installation or

removal, disconnect the line cord/LAN

cable and the AC/DC adapter from the

DTL/ITL multiline terminal.

If the DSS consoles are connected by a

"Digital port connection", one phone

could have up to 32 DSS consoles.

If the DSS console is connected to an IP

phone as side option, the maximum is

only one DSS console per phone..

Remove both plastic panels from the front of the

multiline terminal.

Turn multiline terminal upside down.

Only one DCL-60-1 CONSOLE can be attached to the

DTL/ITL multiline terminal.

UNIVERGE SV8100