UNIVERGE SV8100
System Hardware Manual
Knockout
Figure 7-25 Bottom Option Interface Knockout
7.
Using the exposed Bottom Option Interface as a guide, install
the ADA-L UNIT in the bottom of the DTL/ITL multiline terminal.
Push down until left and right tabs are seated (Refer to
7-26 Install ADA-L UNIT on page
8.
Return tilt leg to original position.
9.
Reconnect all cables previously disconnected.
7-35).
Figure 7-26 Install ADA-L UNIT
Issue 9.0
Bottom Option
Interface
Figure
7 - 35