Install Cooling Fan; Figure 3-110 Opening Chassis Access Panel (19" Chassis); Figure 3-111 Chassis Access Panel Removed (19" Chassis) - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3 - 82
3. Swing access panel outward and unplug fan power cable.

Figure 3-110 Opening Chassis Access Panel (19" Chassis)

4. Remove chassis access panel from rear of chassis.
5. Remove cabling from retention clips.

Figure 3-111 Chassis Access Panel Removed (19" Chassis)

6. Remove two screws securing fan to access cover. Keep
screws for use when installing replacement fan [refer to
3-111 Chassis Access Panel Removed (19" Chassis) on page
3-82].
9.1.2

Install Cooling Fan

1. Align replacement fan with holes and secure with two screws
[refer to
Chassis) on page
Figure 3-111 Chassis Access Panel Removed (19"
3-82].
UNIVERGE SV8100
Fan Power Cable Plug
Installing the SV8100 Chassis
Figure