Led Indications - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
The IPLA daughter board provides:
32 (PZ-32IPLA) channels

64 (PZ-64IPLA) channels

128 (PZ-128IPLA) channels

Refer to the following table for maximum upgrade capacities of the
PZ-32IPLA PZ-64IPLA
/
Table 2-4 SV8100 Maximum 9.5" Gateway and 19" System Capacities

– Blades on page 2-9
When installing an IPLA daughter board, the system allocates the
maximum number of trunk ports for the blade being installed.
This daughter board is installed on the CD-CP00.
3.4.2 Installation
To install a PZ-32IPLA/PZ-64IPLA/PZ-128IPLA on the CD-CP00:
Do not remove or install the CD-CP00 with the
power on.
1. Turn off system power, and remove the CD-CP00.
2. Install the IPLA daughter board on the CD-CP00 blade.
3. Insert the CD-CP00 into slot 1 in the Controlling Chassis.
Refer to

3-3
4. Connect the IPLA daughter board to the CD-RTB, CD-ETIA or
to an external switching hub using an Ethernet cable.
5. Refer to the UNIVERGE SV8100 Programming Manual for
detailed programming instructions.
3.4.3 Switch Settings
This daughter board does not have any switch that needs to be set
and does not require any hardware setting.
3.4.4

LED Indications

LED indications for the PZ-32IPLA, PZ-64IPLA and PZ-128IPLA
Daughter Boards are indicated in
LED Indications. Each LED is listed with its associated function and
PZ-128IPLA daughter board:
/
Figure 3-3 19" Controlling Chassis – Guides Slot 1 on page
for more details.
Table 4-13 IPLA Daughter Board
Issue 9.0
4 - 31