Switch Settings; Figure 9-16 Ap(A)-R Unit/Ap(R)-R Unit Switches - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
3.3.1

Switch Settings

The AP(A)-R Unit and AP(R)-R Unit have three switch locations.
Refer to Table 9-3 AP(A)-R/AP(R)-R Unit Switch Settings
description of each switch and an explanation of the settings.

Figure 9-16 AP(A)-R Unit/AP(R)-R Unit Switches

Switch
SW1
SW3
Dip
Switches
(DSW)
Table 9-3 AP(A)-R/AP(R)-R Unit Switch Settings
SW1-1 Connects to multiline terminal (default).
SW1-2 Not Used
Sets impedance to 600  for devices such as
SW3-1
modems or facsimile machines.
SW3-2 Used for complex impedance devices such as
single line telephones.
DSW
Leave switches at default.
1~8
Description/Settings
Issue 9.0
for a
9 - 15