Figure 3-87 Removing Fan Access Panel; Figure 3-88 Connecting External Battery To Chs2U - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3 - 68
3. Remove fan access panel from rear of CHS2U chassis.

Figure 3-87 Removing Fan Access Panel

4. Connect one end of Battery Connection Cable to Battery
Connector on rear of Basic and Expansion chassis.

Figure 3-88 Connecting External Battery to CHS2U

5. Connect other end of cable to Battery Connector on rear of
CHS LARGE BATT BOX chassis. Refer to
CHS LARGE BATT BOX Connection on page 3-69
3-90 Dual CHS LARGE BATT BOX Connection on page
UNIVERGE SV8100
Figure 3-89 Single
or Figure
Installing the SV8100 Chassis
3-69.