UNIVERGE SV8100
System Hardware Manual
2.
Install cabling into retention clips [refer to
Access Panel Removed (19" Chassis) on page
3.
Insert access panel hinges into slots on rear of chassis.
4.
Plug fan power cable into three prong plug [refer to
3-110 Opening Chassis Access Panel (19" Chassis) on page
3-82].
5.
Reinstall access cover and secure with retaining screw (refer to
Figure 3-109 19" Chassis Access Panel on page
Issue 9.0
Figure 3-111 Chassis
3-82].
Figure
3-81).
3 - 83