Chapter 8 Installing D Term Series I Telephones; General Information; Dtr-2Dt-1 Tel; Section 2 Multiline Terminals - NEC Univerge SV8100 System Hardware Manual

Installing D
S 1 G
ECTION ENERAL
The SV8100 system supports several different D
terminals and an Attendant Console. This chapter describes each terminal
and the console and provides instructions for attaching the terminals to the
system and for wall mounting.
The compact 19" chassis provides 111 total ports (80 digital terminals) and
can be expanded, using three additional 19" chassis, for a maximum of
444 ports (368 digital terminals).
Only the DT300/DT700, D
cordless telephones and wireless telephones discussed in the document
can be installed on the SV8100 system.
S 2 M
ECTION ULTILINE
2.1
System Hardware Manual
term
Series i Telephones
I
NFORMATION
term
To avoid damage to equipment, do not install the
term
D 70 on the SV8100 system. The D
DTP) terminal uses -24V and has no protection from
the -48V power supply used by the SV8100 system.
T
ERMINALS

DTR-2DT-1 TEL

This digital nondisplay multiline terminal has two programmable
line keys (each with a 2-color LED), nine function keys, a built-in
speakerphone, and a large LED to indicate incoming calls and
messages. This terminal is available in black or white.
This terminal has a built-in data port that is available for analogue
devices. Each terminal requires a digital port.
The DTR-2DT-1 TEL does not support adapters.

term
Series i multiline
Series i telephones, single line telephones,
term
70 (DTU/
Chapter
8
8 - 1