UNIVERGE SV8100
System Hardware Manual
1.
Ensure Controlling and Expansion chassis are
powered down.
2.
Using the NEC provided CAT5 straight-through
cable(s), attach one end to each Expansion Chassis
CN2 connector on the PZ-BS11 blade (see
3-20 System Expansion Cabling on page
Attach the opposite end to the CN2, CN3 or CN4
connector on the PZ-BS10 of the Controlling
Chassis.
Install in Expansion
Install in Expansion
Install in Expansion
Install in Controlling
Figure 3-20 System Expansion Cabling
3.
Repeat for additional Expansion Chassis.
Chassis
Chassis
Chassis
Chassis
Issue 9.0
Figure
3-13).
3 - 13