Figure 3-66 Rack Mount 19" Chs2U - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

System Hardware Manual

Repeat for additional chassis mounting.

Figure 3-65 Rack Mount Bracket Installed 19" CHS2U

Carefully slide the chassis into desired location in the rack. Make sure

the hooks on the mounting bracket are inserted into the back of the

chassis, securing it in place. Note that the cabling is run through the front

of the rack for ease of access.

Each CHS2U chassis will require approximately

3.5" of height within the rack.

Secure the brackets to the rack using the screws supplied.

Repeat for additional chassis mounting.

Single CHS2U Rack Mount

Figure 3-66 Rack Mount 19" CHS2U

Single CHS2U Rack Mount with

Three Expansion Chassis