Configuring The Ip Telephone For The Correct Number Of Line Keys; Table 5-8 Ten Key Kit Type - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
5 - 40
3. Follow the directions below for the type of line key module
installed:
2-Button
6-Button
8-Button
12-Button
24-Button
4. Save to memory by pressing line key 2, 8, 14 or 20. The display
changes back to the Service Class R/W mode and the
Message Waiting (MW) LED is On Red.
5. Press Exit to return the telephone to idle.
4.5.3

Configuring the IP Telephone for the Correct Number of Line Keys

1. Press Menu, then 0 (Config) to enter the terminal program
mode.
2. At the Login screen, enter the user name (default = ADMIN)
and password (default = 6633222) and press the OK Softkey.
3. Press 3 for Maintenance Setting.
4. Press 4 for Adjust.
5. Press 2 for Key Kit Type.
6. Press the Up/Down key to select the Key Kit.
Ten Key Kit Entry
Kit1
Kit2
Kit3
Kit4
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Table 5-7 Line Key Type
Line Key Type

Table 5-8 Ten Key Kit Type

Type A – Japan with cursor key
Type A – US with cursor key
Type B – US with cursor key
UNIVERGE SV8100
Push
1
2
3
4
5
Description