Description - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
6.3.1

Description

The Router blade is a 4-port switching hub which complies with the
ethernet specification for both 100 Base-TX and 10 Base-T. This
blade is compatible in LAN applications using 10Mbps and 100Mbps.
All ports automatically identify and switch100 Base-TX, 10 Base-T
and Full/Half Duplex. This blade provides:
Configurable on Each Port: Auto Negotiation/Full Duplex/Half Duplex

MDI/MDI-X Auto Crossover

Tag VLAN Based on IEEE802.1Q

Port-Base VLAN

Port Mirroring

PPPoE Client

Multi-Protocol Bridge

RIP/RIPV2/OSPFv2/BGP4

Policy Routing

DHCP

NAT/NAPT

SIP-NAT

IPnP NAT Traversal

DNS Proxy

NTP/SNTP

QoS (PQ, CBQ, LLQ, Shaping)

VPN (IPSec/IKE)

AAA (Login)

Firewall (Static/Dynamic Filter)

SNMPv1

Syslog

TFTP Client

Backpressure/Flow Control Feature

Auto MAC Address Learning/Migrating/Aging

Learn Maximum 8k MAC Addresses

Store and Forward Switching Method

Maximum 100m Transmission Distance by CAT-5 Cable

Two Status LEDs

Issue 9.0
4 - 113