Ap(A)-R Unit/Ap(R)-R Unit (Port Adapter); Figure 9-15 Connecting A Multiline Terminal To An Analogue Telephone Using An Ap(A)-R Unit - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3.3
9 - 14

AP(A)-R Unit/AP(R)-R Unit (Port Adapter)

The AP(A)-R Unit Analogue Port Adapter without Ringer or the AP(R)-R Unit
Analogue Port Adapter with Ringer is used to install a single line telephone,
modem, credit card reader, wireless headset, or other compatible analogue
device.
The AP(R)-R Unit generates ringing signals and requires an AC-2R/AC-3R/
ACA-UA Unit.
The AP(A)-R Unit or the AP(R)-R Unit can be installed on all multiline
terminals except the DTR-2DT-1.
Figure 9-15 Connecting a Multiline Terminal to an analogue Telephone using
an AP(A)-R Unit/AP(R)-R Unit (Example)
AP(R)-R Unit is connected to the ESI(8)-U( ) ETU and to an analogue
telephone.
Multiline Terminal + AP(A)-R Unit or AP(R)-R Unit
ESI
ETU
Line Cord (2-line)
Figure 9-15 Connecting a Multiline Terminal to an analogue Telephone using an
AP(A)-R Unit/AP(R)-R Unit (Example)
illustrates how the AP(A)-R Unit/
Line Cord (2-line)
Core
AC Adapter
(use only with AP(R)-R Unit)
term
Installing D Series i Optional Equipment
UNIVERGE SV8100
Analogue
Telephone