Issue 9.0
9 - 8
Remove Screw
Figure 9-10 Removing AD(A)-R Unit Cover
3.
Locate the adapter terminals on the unit.
4.
Remove the cap on the adapter terminal to expose the metal
receptacle. Push the cable in the applicable receptacle, and
replace the cap. Line up the slot on the cap with the slot on the
metal receptacle to ensure proper contact. Refer to
Figure 9-11 Attaching Cables to the AD(A)-R
Attach the cables to the AD(A)-R Unit according to
AD(A)-R Unit Cable Connections on page
Figure 9-11 Attaching Cables to the AD(A)-R Unit
term
Installing D
Series i Optional Equipment
UNIVERGE SV8100
Unit.
Table 9-1
9-9.