Conditions; Single Sv8100 To Ipk/Ipk Ii Chassis Connectivity; Figure 4-19 Sv8100 To Ipk/Ipk Ii Connection - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
4 - 42
3.6.2

Conditions

The IPK/IPKII systems are limited to 18 total card slots.

An IPK system can support the migration card, provided the cards and

terminals are listed below as being supported. It may be necessary to
upgrade firmware as noted.
MEGACO is not supported.

3.6.2.1

Single SV8100 to IPK/IPK II Chassis Connectivity

Figure 4-19 SV8100 to IPK/IPK II Connection

typical connection layout of the SV8100 and IPK/IPK II with
Version 4.00 or lower.
IPK/IPK II
Slot Layout:




CAT5 LAN Cable x 3
Maximum Length: 3' 9"
(1.2m)
Figure 4-19 SV8100 to IPK/IPK II Connection
Slot 1 ~ 6: 1st SV8100 chassis slots 1 ~ 6
Slot 7 ~ 14: 1st IPK II cabinet slots 1 ~ 8
Slot 15 ~ 22: 2nd IPK II cabinet slots 1 ~ 8
Slot 23 ~ 24: 3rd IPK II cabinet slots 1 ~ 2
UNIVERGE SV8100
illustrates a
SV8100
MGN-U13 ETU
Installing the SV8100 Blades