Issue 9.0
S
3
I
ECTION
NSTALLING
3.1
9 - 4
A
DAPTERS
AC Adapter
3.1.1
AC-2R/AC-3R Unit
This unit shown in
Figure 9-4 AC-2R/AC-3R Unit (AC Adapter)
to ancillary devices or to an Attendant Console. The AC-2R/AC-3R Unit must
be connected to some adapters that are installed on a multiline terminal.
When more than one adapter is installed on a multiline terminal, only one
AC-2R/AC-3R Unit is necessary.
Figure 9-4 AC-2R/AC-3R Unit (AC Adapter)
The power requirements for the AC-2R/AC-3R Unit are:
Input: 110~240 Vac, 50/60 Hz, 45 VA
Output: 27 Vdc, 750mA
Polarity:
3.1.2
ACA-U( ) Unit (AU Only)
This unit provides power to ancillary devices or to an Attendant
Console. The ACA-U( ) Unit must be connected to an adapter that is
installed on a Multiline Terminal. When more than one adapter is
installed on a Multiline Terminal, only one ACA-U( ) Unit is
necessary.
The power requirements for the ACA-U( ) Unit are:
Input: 240 Vac, 50Hz
Output: 24 Vdc, 400mA
Polarity:
term
Installing D
Series i Optional Equipment
UNIVERGE SV8100
provides power