Figure 7-13 Pgd Adapter Cable Connection - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 9.0
7 - 16
4.
Terminate the extension leads to GRN/RED of the modular jack.
Terminate the unused leads to the jack.
5.
Install bridging clips as required.
6.
Plug a modular line cord from the mod jack to the CN1 connector on the
PGD Adapter.
7.
Connect the two-conductor station cable from the CN5 connectors in the
PGD Adapter to the external relay/external page.

Figure 7-13 PGD Adapter Cable Connection

UNIVERGE SV8100
Installing SV8100 Optional Equipment

Advertisement

Table of Contents
loading

Table of Contents