Issue 9.0
4 - 18
3.1.2
Installation
Each SV8100 system must have the CD-CP00 installed in Slot 1
of the Controlling Chassis.
The chassis power must be off when installing or removing
the CD-CP00.
After removing a previously installed CD-CP00, handle
the blade, carefully, from the edges. If certain solder
points/resistors are touched on the back of the blade, some
RAM/temporary memory may be lost (e.g., time, date, user-
defined settings, etc.)
1.
Install the battery on the CD-CP00. The polarity "+ " symbol
must be on top as illustrated in
Installation.
IMPORTANT INSTALLATION NOTES
Figure 4-7 CD-CP00 Battery
Figure 4-7 CD-CP00 Battery Installation
UNIVERGE SV8100
Installing the SV8100 Blades