Gigabit Adapter (Gba-L Unit) - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
10.6
7 - 52
2. Answering Calls:
If you receive a call via PSTN during a conversation via

LAN, answer the call by completing the LAN call and
placing the handset back into the cradle. Change the
LAN/PSTN Change Switch to PSTN and then lift the
handset to answer the call. If you change the LAN/PSTN
Change Switch to the PSTN position while talking via
LAN, the LAN call is disconnected.
Other than receiving calls, no other terminal function is

available.
3. Adjusting the Ring Volume
Use the Volume Control Switch located on the PSA-L adapter
to adjust through the three available volume levels.
Other than receiving calls, no other terminal function is

available.
4. When Power is Restored
The IP multiline terminal restarts and reconnects to the network
LAN. However, if you are on a PSTN call when the power is
restored, your conversation continues until the handset is
placed in the cradle. Once this occurs, the IP terminal restarts
and reconnects to the LAN.
Other than receiving calls, no other terminal function is

available.

Gigabit Adapter (GBA-L UNIT)

The GBA-L UNIT enables IP telephones (DT730/DT750) to operate in a
Gigabit Ethernet environment. A single Gigabit Ethernet desktop drop
provides a 10/100Mbps to the IP telephone and a gigabit connection to a
personal computer. The Gigabit Adapter is installed on the bottom of the IP
telephone and offers a gigabit interface to the LAN side and PC port. The
Gigabit Adapter is powered by PoE or can operate off of local power.
UNIVERGE SV8100
Installing SV8100 Optional Equipment