Installing The 8Lkd (Ld)-L Unit; Figure 5-67 8Lkd (Ld)-L Unit; Figure 5-68 Remove Side Panel From Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
5 - 66
5.2.2.1

Installing the 8LKD (LD)-L UNIT

1.
2.
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

Figure 5-67 8LKD (LD)-L UNIT

To prevent possible damage to the 8LKD
(LD)-L UNIT or the DTL multiline
terminal during installation or removal,
disconnect the line cord/LAN cable and
the AC/DC adapter from the DTL
multiline terminal.
Turn multiline terminal upside down.
Only one 8LKD (LD)-L UNIT can be attached to the

DTL multiline terminal.
Pry the side panel from the multiline terminal.
Side Panel

Figure 5-68 Remove Side Panel from Multiline Terminal

UNIVERGE SV8100
Screw