Connectors; Table 4-38 Pz-4Cote/Pz-4Cotg Rj-61 Cable Connector Pin-Outs - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
4 - 78
5.2.3

Connectors

Table 4-38 PZ-4COTE/PZ-4COTG RJ-61 Cable Connector Pin-Outs

shows the pin-outs for the RJ-61 connector.
the PZ-4COTE/PZ-4COTG Daughter Board on page 4-76
location of the connectors on the PZ-4COTE/PZ-4COTG daughter
board.
Table 4-38 PZ-4COTE
CN2, Trunks – Connecting to CD-4COTA
The CN2 connector is not polarity sensitive (tip-to-tip, ring-to-ring)
The CN2 connector is polarity sensitive (tip-to-tip, ring-to-ring)
/
PZ-4COTG RJ-61 Cable Connector Pin-Outs
RJ-61 Cable Connector
Pin No.
RJ-61 Cable Connector
CN2, Trunks – Connecting to CD-LTA Blade
Pin No.
UNIVERGE SV8100
Figure 4-33 Installing
/
CD-4COTC Blade
Connection
1 Circuit 8 – Tip
2 Circuit 7 – Tip
3 Circuit 6 – Tip
4 Circuit 5 – Ring
5 Circuit 5 – Tip
6 Circuit 6 – Ring
7 Circuit 7 – Ring
8 Circuit 8 – Ring
Connection
1 Circuit 4 – Tip
2 Circuit 3 – Tip
3 Circuit 2 – Tip
4 Circuit 1 – Ring
5 Circuit 1 – Tip
6 Circuit 2 – Ring
7 Circuit 3 – Ring
8 Circuit 4 – Ring
Installing the SV8100 Blades
shows the