Issue 9.0
S
S
5
TAND
ECTION
5.1
3 - 44
3.
Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-14
grounding the system.
4.
Refer to
3-15
to continue installation of the chassis or, Chapter 6
paragraph
for installation of blades.
M
OUNTING THE
Stand Mounting the 19" (CHS2U) Chassis
A single or multiple chassis can be stand mounted. Controlling and Expansion
chassis can be stand mounted using the CHS2U STAND KIT(K) and CHS2U
STAND KIT (EXT).
5.1.1
CHS2U Chassis Installation
1.
Using the supplied screws, assemble the CHS2U STAND
KIT(K) and CHS2U STAND KIT (EXT) (refer to
Assemble Stand Mount with
Figure 3-53 Assemble Stand Mount with Screws
2.
Secure the CHS2U chassis to the assembled CHS2U STAND
KIT, see
STAND KIT with Screws on page
2.3.5 Install AC Power Cords on 19" Chassis on page
2.1 Installation and Safety Precautions on page 4-3
C
HASSIS
Screws).
Figure 3-54 Secure CHS2U Chassis to CHS2U
UNIVERGE SV8100
2.3.3 Install
for complete details on
Figure 3-53
Expansion
Plate
3-45.
Installing the SV8100 Chassis