Connectors; Table 4-25 Mgn-U13 Etu Connectors; Table 4-26 Mgn-U13 Etu Connector Pin-Out - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
3.6.9

Connectors

Refer to Figure 4-23 MGN-U13 ETU Migration Board on page 4-49
for location of the connectors described in
Connectors.

Table 4-25 MGN-U13 ETU Connectors

Connector
CN 1 Connects to the backboard.
CN 2 Connects to CN 2 on the EXP-U ( ) ETU (Installed in the
first expansion cabinet) using an expansion cable.
CN 4 For maintenance.
CN 5 Connects to CN 2 on the PZ-BS10 in SV8100 system using
the NEC provided CAT5 straight-through cable.
CN 6 Connects to CN 3 on the PZ-BS10 in SV8100 system using
the NEC provided CAT5 straight-through cable.
CN 7 Connects to CN 4 on the PZ-BS10 in SV8100 system using
the NEC provided CAT5 straight-through cable.
CN 9 For maintenance.

Table 4-26 MGN-U13 ETU Connector Pin-Out

the RJ-61 connector.
on page 4-41
ETU board.
Connector Description
Figure 4-18 MGN-U13 ETU Migration Board
shows the location of the connectors on the MGN-U13
Table 4-26 MGN-U13 ETU Connector Pin-Out
RJ-61 Cable Connector
MGN-U13 ETU – CN5, CN6, CN7
Pin No.
1
2
3
4
5
6
7
8
Issue 9.0
Table 4-25 MGN-U13 ETU
show the pin-outs for
Connection
HW_UP (+)
HW_UP (-)
HW_DWN (+)
FS (+)
FS (-)
HW_DWN (-)
CK8M (+)
CK8M (-)
4 - 51