UNIVERGE SV8100
System Hardware Manual
16.
Attach the analogue trunk cable and the handset cable. Refer
to
Figure 7-37 PSA-L UNIT Connections on page
17.
Install the legs, pushing upwards until both locks snap into
place.
18.
Return tilt leg to desired position.
19.
Place the multiline terminal numbered keypad up.
20.
Connect the Line cord, the PSTN cable and the Handset cord
(if used).
21.
Remove both plastic panels from the front of the multiline
terminal.
Figure 7-46 Remove Plastic Panels
Issue 9.0
7-44.
7 - 49