Supported Terminals; Switch Settings; Figure 4-23 Mgn-U13 Etu Migration Board; Table 4-21 Supported Terminals - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
3.6.6

Supported Terminals

Terminal
DTL/DT300 Retro key pad required AU Models

DTR Series i AU Models
term
D Series E (DTU/DTP) support is available with Version 2.51 or higher.

3.6.7

Switch Settings

Refer to

Figure 4-23 MGN-U13 ETU Migration Board

of switches on the MGN-U13 ETU and
ETU on page 4-50

Table 4-21 Supported Terminals

Description
DT300 series terminals are not supported in a migration system
unless connected to a DLCA blade in the controlling SV8100 chassis.
for a brief explanation of SW1 and SW2.
Figure 4-23 MGN-U13 ETU Migration Board
Issue 9.0
for the location
Table 4-22 SW1 MGN-U13
4 - 49