Installing The Numbered Keypad; Figure 5-41 Install Plastic Panels - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
4.7.2

Installing the Numbered Keypad

1. Slide the replacement numbered keypad into the grooves
located on the inside of the telephone, then press down on the
keypad to snap it into place. Refer to
Numbered Keypad into DT300/DT700 Series
Figure 5-40
2. Install the Numbered Keypad Panel on the multiline terminal.
Refer to
Line Key
Panel
Numbered
Keypad
Panel
Install New Numbered Keypad into DT300/
DT700 Series Terminal
Figure 5-41 Install Plastic

Figure 5-41 Install Plastic Panels

Issue 9.0
Figure 5-40 Install New
Terminal.
Panels.
Desi Printer
Sheet
5 - 45