Installing The 19" Controlling Chassis; Figure 3-2 Chs2U Chassis (Rear View) - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
System Hardware Manual
Internal Battery Mount

Figure 3-2 CHS2U Chassis (Rear View)

2.3.1

Installing the 19" Controlling Chassis

1. Ensure the chassis is powered down.
2. Align the CD-CP00 blade with the Slot 1 guides of the
Controlling Chassis.
Figure 3-3 19" Controlling Chassis – Guides Slot 1
3. Slide the CD-CP00 blade into the chassis until resistance (back
Fan Unit
(inside of cover)
Battery Connector
(inside of cover)
Do not remove or install this blade with the
power on.
Issue 9.0
AC Connector
Frame Ground
(FG) Terminal
3 - 3