Figure 8-22 Removing The Button Set From A Multiline Terminal; Figure 8-23 Inserting A New Button Set Into A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
S 8 I
ECTION NSTALLING A
The BS( )-R Unit button set can be installed on a multiline terminal to accommodate
French and Spanish languages. The keypad provides the appropriate language
designations.
1.
2.
3.
4.
8 - 18
B S
UTTON
Remove the plastic cover. (Refer to paragraph
on page 8-16.)
Pull up on the tab and lift the button pad away from the telephone to remove the
existing button.

Figure 8-22 Removing the Button Set from a Multiline Terminal

Slide the new button set into the grooves located on the inside of the telephone,
then press down on the button set to snap it into place.

Figure 8-23 Inserting a New Button Set into a Multiline Terminal

Insert the line card and plastic panel on the multiline terminal.
M
ET ON A ULTILINE
UNIVERGE SV8100
T
ERMINAL
6.2 Removing the Plastic Panel
term
Installing D Series i Telephones