Figure 7-22 Nec Terminal Connection To An Ieee 802.3Af Poe Switch - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Figure 7-22 NEC Terminal Connection to an IEEE 802.3af PoE Switch

System Hardware Manual

Connect the NEC VoIP telephone to the TEL connector on the

ILPA-R adapter with the LAN cable provided with the adapter.

If a customer-provided cable is used, the total length from

the switch to the telephone should be less than 328 feet.

The adapter can be positioned either closer to the

multiline terminal or switch – it does not matter.

Connect a crossover LAN cable to the LAN connector on the

ILPA-R adapter. Plug the opposite end into the switch which is

to provide power to the telephone. Refer to

Terminal Connection to an IEEE 802.3af PoE

If a straight-through cable is used, NIC Auto Detection

must be enabled in Programs 10-12-05 (CD-CP00), 84-

05-02 (VOIPU) or 85-01-03 (SHUBU).

Figure 7-22 NEC