Applying Power To The Dt700 Multiline Terminal; Figure 5-23 Leading Line Cords On A Multiline Terminal - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

Lead the Line and Handset cables through the applicable grooves.

Applying Power to the DT700 Multiline Terminal

The DT700 terminal supports two different power sources for the terminal:

AC/DC Adapter (AC-2R/AC-3R/ACA/AC-L( ))

Plug the optional AC/DC Adapter input Jack in the terminal base unit,

and plug the 2-prong wall plug of the AC Adapter in a standard AC wall

Ask your Supplier for more details

In-Line Power/PoE (Power over Ethernet)

In-Line Power (sometimes called Power Over Ethernet) is a LAN

technology that allows standard 10 Base-T/100 Base-TX data cables to

pass electrical current from a power source to a requesting end device.

ITL Terminals

An AC-L Unit is required if using local power.

Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals

UNIVERGE SV8100