UNIVERGE SV8100
W
S
3
ALL
ECTION
3.1
System Hardware Manual
M
OUNTING THE
Wall Mounting the 19" (CHS2U) Chassis
When wall mounting the chassis, ensure the wall can support the weight of the
chassis (55 lbs per system chassis – including blades, cords, power supply,
etc.). The chassis is secured to the wall with a wall mount bracket. Ensure
that enough space is available to allow the installation of additional expansion
chassis.
3.1.1
CHS2U Chassis Wall Mount Installation
1.
Use the template shown in
Guide (19" Chassis) on page 3-20
drilling.
C
HASSIS
Figure 3-27 Wall Mount Spacing
Plywood should first be installed on the
wall where the chassis will be positioned.
This allows secure anchoring of the
screws which support the weight of the
chassis.
Due to chassis weight, NEC recommends
only a single CHS2U chassis per wall
mount.
Issue 9.0
for required spacing before
3 - 19