Add On Module (Adm) - (Ot Only); Connecting The Interface Unit; Figure 9-30 Adm Interface Unit - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100
4.2
System Hardware Manual

Add on Module (ADM) - (OT Only)

The D16(LD)-R ADM creates a 16-button Phonebook directory. The interface
for this unit shown in

Figure 9-30 ADM Interface Unit

adapter connector for the applicable multiline terminal. When another adapter
needs to be added, this interface must be moved to the left adapter connector
to preserve the cable integrity.
DSW1
Position
4.2.1

Connecting the Interface Unit

1. Set DSW1 to the pattern for the applicable multiline terminal as
shown in
2. Place the ADM and multiline terminal upside down and remove
the Base Units.
O N
3
1
1 2 3 4 5 6 7 8
Figure 9-30 ADM Interface Unit
Table 9-4 DSW1 Switch Positions
Issue 9.0
is connected in the right
DSW1
ON
1 2 3 4 5 6 7 8
on the next page.
9 - 29