Figure 3-62 Stand Mount Brackets Installed; Figure 3-63 Secure The 9.5" Stand Mounting With Screws - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3 - 52
3. With brackets snug against the 9.5" chassis, carefully slide the brackets
in opposite directions (refer to arrows
Installed), until they snap into place.

Figure 3-62 Stand Mount Brackets Installed

4. Secure the 9.5" assembly to a flat surface with the four screws supplied
(refer to Figure 3-63 Secure the 9.5" Stand Mounting with Screws on
page 3-53).
To prevent possible damage to the 9.5" chassis due to
falling, NEC recommends the screws be installed in
the stand mount brackets as soon as possible.
UNIVERGE SV8100
Figure 3-62 Stand Mount Brackets
Installing the SV8100 Chassis