Connecting The Ct(U)-R Unit To The Pc; Installing The Optional Headset; Installing The Driver On The Pc; Hf-R Unit (Handsfree Unit) - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
S 4 I
ECTION NSTALLING
4.1
9 - 26
3.5.2

Connecting the CT(U)-R Unit to the PC

Connect USB cable from the PC to the CT(U)-R Unit as shown in
Figure 9-27 Connecting the USB Cable to the CT(U)-R

Figure 9-27 Connecting the USB Cable to the CT(U)-R Unit

3.5.3

Installing the Optional Headset

Install the headset and anchor it in the cord slot on the multiline
terminal as shown in
Multiline Terminal on page
3.5.4

Installing the Driver on the PC

Using the download from Web with the CT(U)-R Unit install the driver
on your PC. Refer to the CT(U)-R Unit installation instructions for
installing the driver.
U
NITS AND OTHER

HF-R Unit (Handsfree Unit)

The Handsfree Unit provides full-duplex handsfree communication for a
desktop user. Large or enclosed areas may cause poor full-duplex operation.
This unit comes with the handsfree adapter and an external microphone unit.
This adapter can be installed on any DTR multiline terminal except DTR-2DT-
1.
Figure 9-23 Attaching the Headset to the
9-22.
D
EVICES
term
Installing D
UNIVERGE SV8100
Unit.
Series i Optional Equipment