Stand Mounting The 9.5" Gateway (Chs2U Gw) Chassis (Au Only); Figure 3-59 Position The 9.5" Stand Mount Brackets - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
5.2
3 - 50

Stand Mounting the 9.5" Gateway (CHS2U GW) chassis (AU Only)

The 9.5" chassis can be stand mounted using the brackets supplied. The
following section describes this procedure.
1. Lay the two bracket halves on a flat surface.

Figure 3-59 Position the 9.5" Stand Mount Brackets

2. Using the slots on the sides of the 9.5" chassis as guides, insert the
stand mount brackets into the chassis (refer to
Stand Mount Bracket
Mount Bracket on page
and Figure 3-61 Attach Remaining 9.5" Stand
3-51).
Installing the SV8100 Chassis
UNIVERGE SV8100
Figure 3-60 Attach 9.5"