Removing The Numbered Keypad; Figure 5-38 Remove Plastic Panels - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
5 - 44
4.7.1

Removing the Numbered Keypad

To prevent possible damage to the Numbered
Keypad or the DTL/ITL multiline terminal during
installation or removal, disconnect the line cord/
LAN cable and the AC/DC adapter from the DTL/
ITL multiline terminal.
1. Remove the Numbered Keypad Panel. (Refer to paragraph
Figure 5-38 Remove Plastic
Line Key
Panel
Numbered
Keypad
Panel
2. Pull down on the tab and lift the Numbered Keypad away from
the telephone to remove the existing button. Refer to
5-39 Removing Numbered Keypad from DT300/DT700 Series
Terminal.
Figure 5-39
Installing DT300/DT700 Series (DTL/ITL) Digital and IP Multiline Terminals
Panels.)

Figure 5-38 Remove Plastic Panels

Removing Numbered Keypad from DT300/DT700
Series Terminal
UNIVERGE SV8100
Desi Printer
Sheet
Figure