Figure 7-8 Installing The Screws - NEC Univerge SV8100 System Hardware Manual

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
System Hardware Manual
In some cases, when testing the operation of an
extension port when connecting to an PGD Adapter,
a technician may connect a line cord directly from an
extension port on the CD-8DLCA/CD-16DLCA
Blade. Though this is not the recommended
connection, it can be used to test these devices.
Should a direct connection of this type be made to the
base station of the PGD Adapter, the line cord must
be 2-wire (1-pair). If a 2-pair wire is used, the system
provides power to the unused pair. This can prevent
the cordless telephone from acquiring a link with the
base station or it can damage the PGD Adapter or the
SV8100 station card.
13.
Optional:
To wall mount the PGD Adapter, insert two wood screws 100mm apart (3
15/16"). Leave 3mm (1/8") of the screw exposed. The screws can be
installed either vertical or horizontal, depending on which position fits
best for your location.

Figure 7-8 Installing the Screws

Issue 9.0
7 - 9

Advertisement

Table of Contents
loading

Table of Contents