Issue 9.0
7 - 78
12.5.3
Installing the IP Video Doorphone
Figure 7-87 Installing the IP Video Doorphone
The Mounting Bracket, Screw and Screw Cover are attached to the Doorphone
Main Body.
The Wall Mounting Plate is purchased locally by the user.
When installing the Doorphone, the Mounting Bracket, screw and screw
cover can be removed and installed using the following procedure:
1.
The Bracket is mounted to the Wall Mounting Plate (on the
wall) using two wood screws (3.8x20mm) or two M4x25mm
screws.
2.
Connect LAN cable to the LAN Connector from the PoE
Switch.
3.
Insert the Bracket tab into the slot on top of the Main body.
UNIVERGE SV8100
Installing SV8100 Optional Equipment