Installation; Led Indications; Figure 4-32 Cd-4Cota/Cd-4Cotc Blade; Table 4-36 Cd-4Cota/Cd-4Cotc Led Indications - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
LED Indication
Live LED Busy LED
(Green) (Red)
On On
Flash (1s) On
Flash (1s)
On
Flash
(100ms)
Off
On
Off
Off
Flash 80ms
(On/Off) x 3/
400ms Off
4 - 74
5.1.2

Installation

Install the CD-4COTA blade into an available slot in the chassis.
(Refer to Figure 4-32 CD-4COTA/CD-4COTC Blade on page 4-72
a layout of the blade.)
If the PZ-4COTE/PZ-4COTG is to be used, install this prior to inserting the

CD-4COTA/CD-4COTC blade into the chassis.
5.1.3

LED Indications

LED indications for the CD-4COTA/CD-4COTCare listed in
36 CD-4COTA/CD-4COTC LED
its associated function and LED and Operational status. Refer to
Figure 4-32 CD-4COTA/CD-4COTC Blade on page 4-72
location of the LEDs on the blades.

Table 4-36 CD-4COTA/CD-4COTC LED Indications

Operation Status
System Initializing
The assignment of the unit is refused.
Trouble found during self-diagnostics.
A Channel is busy (use
Normal
another from CH1 ~ CHx).
Operation
All channels are idle.
A Channel is busy (use
Unit Busy
another from CH1 ~ CHx).
All channels are idle.
Downloading firmware.
UNIVERGE SV8100
Indications. Each LED is listed with
Remarks
–
When you exceed the system
capacity.
When the main software
version is not matched.
–
–
–
–
–
–
Installing the SV8100 Blades
for
Table 4-
for the