HUAWEI NetEngine80E/40E Router
Configuration Guide - Basic Configurations
Example
Run the
the air filter, the last time when the air filter was cleaned (referring to the time on the router),
how many days the router had been run since the previous cleaning, and how long the alarm
about cleaning the air filter exists. For example:
<HUAWEI> display dustproof
Clean Dustproof-Net cycle : 365(days)
Last clean date
Up to last clean days
Clean alarm existence days: 0(day)
10.11 Monitoring the Device Status
Monitoring the device status facilitates fault location and cause analysis.
10.11.1 Displaying the System Version Information
The system version information includes the system software version and various hardware
versions.
Procedure
Step 1 Run:
display version
The system version information is displayed.
In practice, using this command in any view, you can view the system version information. The
main information is as follows:
l System software version
l Hardware and software version of the MPUs
l Hardware and software version of the SFUs
l Hardware and software version of the LPUs
l Hardware and software version of the Fan and Black Plane
----End
10.11.2 Displaying Basic Information About the Router
The basic information includes detailed information about the LPU, MPU, SFU, clock board,
power supply, and fan module.
Procedure
Step 1 Run:
display device
Basic information about the router is displayed.
Issue 02 (2011-09-10)
display dustproof
.
.
[ pic-status | slot-id]
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
command. You can view information about the cleaning cycle of
: 2009/02/07
: 1(day)
10 Device Maintenance
274