Redistribute - Digisol DG-GS4826S Management Manual

Layer 3 gigabit ethernet managed switch
Table of Contents

Advertisement

redistribute

This command redistributes external routing information from other
routing protocols and static routes into an autonomous system. Use the no
form to disable this feature or to restore the default settings.
S
YNTAX
redistribute {connected | rip | static} [metric metric-value]
[metric-type type-value] [tag tag-value]
no redistribute {connected | rip | static} [metric] [metric-type]
[tag]
connected - Imports all currently connected entries.
rip - Imports entries learned through the Routing Information
Protocol.
static - Static routes will be imported into this Autonomous
System.
metric-value - Metric assigned to all external routes for the
specified protocol. (Range: 0-16777214: Default: 10)
type-value
tag-value - A tag placed in the AS-external LSA to identify a specific
external routing domain, or to pass additional information between
routers. (Range: 0-4294967295)
C
OMMAND
Router Configuration
D
EFAULT
redistribution - none
metric-value - 10
type-metric - 2
C
OMMAND
This command is used to import routes learned from other routing
u
protocols into the OSPF domain, and to generate AS-external-LSAs.
When you redistribute external routes into an OSPF autonomous
u
system (AS), the router automatically becomes an autonomous system
boundary router (ASBR). If the redistribute command is used in
conjunction with the
generate a "default" external route into the AS, the metric value
specified in this command supersedes the metric specified in the
default-information originate
Metric type specifies the way to advertise routes to destinations outside
u
the AS through External LSAs. When a Type 1 LSA is received by a
router, it adds the internal cost to the external route metric. In other
1 - Type 1 external route
2 - Type 2 external route (default) - Routers do not add internal
route metric to external route metric.
M
ODE
S
ETTING
U
SAGE
default-information originate
– 1201 –
C
48
| IP Routing Commands
HAPTER
Open Shortest Path First (OSPFv2)
command to
command.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg-gs4850s

Table of Contents