Table of Contents
Advertisement
Chapter 3
| Basic Management Tasks
Managing System Files
FTP Download – Copies a file from the switch to an FTP server.
■
HTTP Upload – Copies a file from a management station to the switch.
■
HTTP Download – Copies a file from the switch to a management station
■
TFTP Upload – Copies a file from a TFTP server to the switch.
■
TFTP Download – Copies a file from the switch to a TFTP server.
■
◆
FTP/TFTP Server IP Address – The IP address of an FTP/TFTP server.
◆
User Name – The user name for FTP server access.
◆
Password – The password for FTP server access.
◆
File Type – Specify Operation Code to copy firmware.
◆
File Name – The file name should not contain slashes (\ or /), and the maximum
length for file names is 32 characters for files on the switch or 128 characters for
files on the server. (Valid characters: A-Z, a-z, 0-9, ".", "-", "_")
Note:
Up to two copies of the system software (i.e., the runtime firmware) can be
stored in the file directory on the switch.
Note:
The maximum number of user-defined configuration files is limited only by
available flash memory space.
Note:
The file
"Factory_Default_Config.cfg"
management station, but cannot be used as the destination file name on the
switch.
Web Interface
To copy firmware files:
1.
Click System, then File.
2.
Select Copy from the Action list.
3.
Select FTP Upload, HTTP Upload, or TFTP Upload as the file transfer method.
4.
If FTP or TFTP Upload is used, enter the IP address of the file server.
5.
If FTP Upload is used, enter the user name and password for your account on
the FTP server.
6.
Set the file type to Operation Code.
7.
Enter the name of the file to upload.
can be copied to a file server or
– 60 –
Advertisement
Table of Contents
