Ip Http Secure-Server - Digisol DG-GS4528SE Management Manual

C
u
u
E
R

ip http secure-server (837)

show system (717)
This command enables the secure hypertext transfer protocol (HTTPS) over
ip http secure-server
the Secure Socket Layer (SSL), providing secure access (i.e., an encrypted
connection) to the switch's web interface. Use the no form to disable this
function.
S
D
Enabled
C
Global Configuration
C
u
u
u
U
OMMAND SAGE
You cannot configure the HTTP and HTTPS servers to use the same
port.
If you change the HTTPS port number, clients attempting to connect to
the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
XAMPLE
Console(config)#ip http secure-port 1000
Console(config)#
C
ELATED OMMANDS
YNTAX
[no] ip http secure-server
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
Both HTTP and HTTPS service can be enabled independently on the
switch. However, you cannot configure the HTTP and HTTPS servers to
use the same UDP port.
If you enable HTTPS, you must indicate this in the URL that you specify
in your browser: https://device[:port_number]
When you start HTTPS, the connection is established in this way:
The client authenticates the server using the server's digital
n
certificate.
The client and server negotiate a set of security protocols to use for
n
the connection.
The client and server generate session keys for encrypting and
n
decrypting data.
– 837 –
| Authentication Commands
C 26
HAPTER
Web Server