Edge-Core ECS4110-28T Management Manual page 211

Figure 75: Configuring GVRP for an Interface
To show the dynamic VLAN joined by this switch:
Click VLAN, Dynamic.
1.
Select Show Dynamic VLAN from the Step list.
2.
Select Show VLAN from the Action list.
3.
Figure 76: Showing Dynamic VLANs Registered on the Switch
To show the members of a dynamic VLAN:
Click VLAN, Dynamic.
1.
Select Show Dynamic VLAN from the Step list.
2.
Select Show VLAN Members from the Action list.
3.
Figure 77: Showing the Members of a Dynamic VLAN
– 211 –
| VLAN Configuration
C 6
HAPTER
IEEE 802.1Q VLANs