Display Enlarged Characters - NEC UNIVERGE SV9500 User Manual

DISPLAY ENLARGED CHARAC-
TERS
This feature enables to display characters height as a
double height size for the terminal information on the
LCD. The indication of enlarged characters is available
for 2nd line or 3rd line on the LCD. The line displayed
as enlarged characters can be switched by using the
Line/Feature Key for "Display Enlarged Characters".
The feature key of "Display Enlarged Characters" is
Note
assigned at installation. For details, contact the system
administrator.
• To Switch the Line Indicating Double
Height Characters
By pressing the Soft Key or the Line/Feature Key, you
can switch the characters displayed to double height
size in the order of "Enlarged Characters (2nd line)" →
"Enlarged Characters (3rd line)" → "No Enlarged
Characters". The following shows an example when
using this feature.
• No Enlarged Characters
7:25 AM MON 11 MAY 2015
Mic NoDist
31313
>>>
35
• Enlarged Characters (2nd line)
7:25 AM MON 11 MAY 2015
Mic NoDist
• Enlarged Characters (3rd line)
7:25 AM MON 11 MON 2015
Mic NoDist
31313
>>>
31313
>>>