Browser Unit Type D; Installation Procedure - Ricoh D009 Service Manual

Browser Unit Type D

1.23 BROWSER UNIT TYPE D

1.23.1 INSTALLATION PROCEDURE

This option requires a HDD unit.
Unplug the main machine power cord before you do the following procedure.
SD card slot 2 is basically used only for service maintenance. Do not leave an SD card in
slot 2 after installing an application.
1. Remove the slot cover [1] for SD cards (
2. Turn the SD-card label face [2] to the rear of the machine. Then push it slowly into slot 2
until you hear a click.
3. Plug in and turn on the main power switch.
4. Push the "User Tools" key.
If an administrator setting is registered for the machine, steps 5 and 6 are required.
Otherwise, skip to step 7.
5. Push the "Login/Logout" key.
6. Login with the administrator user name and password.
7. Touch "Extended Feature Settings" twice on the LCD.
8. Touch "Install" on the LCD.
9. Touch "SD Card".
10. Touch the "Browser" line.
11. Under "Install to", touch "Machine HDD" and touch "Next".
D009/D011/D012/D013
x 1).
1-82 SM